Product Code: SKUA71610
Availability: In Stock
$5.71
Ex Tax: $5.71

Qty

This product has a minimum quantity of 4
Specifications:
 
Working Voltage: DC3.7V-DC12V
Max Load: 1A (have better Load less than 700ma)
Quiescent Current: 5ma
Relay Working Current: 20-30ma
Size: 25x11x8mm
Working Mode:   Momentary Toggle Latched adjustable  
Encoding Type: Learning Dot to add Transmitter
Power Type: Can work with DC Power / Rechargeable lithium battery / Rechargeable
 
How to change working mode :
 
Normally Open Port (NO)      Common Port (COM)    Normally Close Port (NC)
 
Momentary : Connect the right side 2 points (M)
Latched : Connect the left side 2 points (L)
Toggle : Let Point L and Point M in non-occupation
 
Momentary------------press one button is working /ON. loosen your finger on the same button is stop/OFF
Toggle---------------press one button for one time is working/ON .press the same button again is stop/OFF .
Latched------------------press one button is working/ON ,press another button is stop/OFF .
 
Learning Code :
 
Latched:
Input 3.5V-12V for the Receiver , Connect the Learning Dot, The receiver Led indicator ON. Press remote button A 1 time, Led indicator flash for 3 times , Then Press remote button B 1 time , Led indicator flash for 3 times again , it mean learning successfully.
 
Momentary / Toggle :
Input 3.5V-12V for the Receiver , Connect the Learning Dot, The receiver Led indicator ON. Press remote button A 1 time, Led indicator flash for 3 times , Then Press remote button A 1 time again , Led indicator flash for 3 times again , it mean learning successfully.
 
Clearing Code:
Connect the Learning Dot 5 seconds  . Until the receiver Led indicator From ON to OFF, it mean Clearing Code
 
Pair the remote control method:
 
1. Key remote control operation (self-locking/jog): Touch the pair of double contacts (tweezer) with a metal object at the same time, the code indicator light is illuminated, press the remote control 1 button, the controller indicator will flash. Once, it means that the code of the remote control 1 button has been copied in, the indicator light will go out, indicating that it has been saved. Then you can use this remote control to complete the remote control operation.
2. Key remote control operation (interlock): When the metal object touches the double contact (tweezer) at the same time, the code indicator light is illuminated. At this time, press the remote control A button, the controller indicator will flash once, indicating The code of the remote control A button has been copied in, and then press the remote control B button, the controller indicator will flash again, indicating that the code of the remote control B button has been copied in, the indicator will be off, indicating that it has been saved. Then you can use this remote control to complete the remote control operation.
 
Package Include:
 
1 x Receiver
1 x Transmitter
 


Write a review

Note: HTML is not translated!